The Scan

The first basic step in the Plek process is the initial scan.

The instrument - strung and tuned to pitch in the case of the Plek Station, or placed under simulated string tension in the case of the Plek Pro - is strapped into the machine.

The fingerboard is then analyzed using the Sensor Module to produce a scan.That scan provides detailed information about the instrument nut, string action, fingerboard and frets.

The Plek machine then produces various representations of that scan that are accurate down to about a thousandth of an inch.

One of those representations might look a bit like this:

So what are we looking at here?

First of all, these are the scan results for the top E string of the guitar. Each string gets its own set of results, at all fret positions. The results can be grouped together to give an overall picture .

So, from bottom to top. The blue line represents the recommended relief for the fingerboard and a guide for trussrod adjustment. Here we can see that the neck needs to be brought up a little in the middle, i.e. the trussrod needs to be tightened up a bit.

The jagged line of “skyscrapers” represents the frets, (magnified and distorted for easier viewing).The wavy red line represents current fret heights.

The green curve represents the recommended fret curve for optimal string action. The straight green line represents the optimal string action. The straight red line represents current string action.

Already we can see that there are a few problems with this particular fingerboard. Some of the frets are way above optimal heights and are probably going to cause buzzing problems when the string is played in those positions.

So, in effect, a Plek scan is a three-dimensional, greatly magnified view of the fingerboard, that provides some very specific information about potential problem areas.



Print version Page up

Plek'd Players: Leon Todd, Australia

Leon Todd is a professional player and guitar teacher from Perth, Western Australia, who has created a series of Plek-related videos on his YouTube channel.

Check out our full length article and interview with Leon here.


Get Plek'd!

Want to get your instrument "plek'd"?

» Plek-Service worldwide
» plekHaus Berlin

News

05.08.2018
Plek @ Guitar Summit Mannheim

Plek and PlekHaus Berlin will be participating in this year's Guitar Summit, Mannheim, Germany.

» read more...

04.06.2018
How does a Plek machine work?

Rhett Shull went along to Righteous Guitars to check out their Plek machine: "I had never seen a PLEK machine in use, and I wasnt really sure what it did. So my friend Ben at Righteous Guitars in Roswell GA took me through the whole process."

» read more...

09.04.2018
Glide Guitars on Reverb

Here's an interesting profile of Japan's Glide Guitars on Reverb.com

» read more...


» more news...

© Copyright 2008 plek / A+D Gitarrentechnologie GmbH
Concept & Design k24designs.com